Fire and blast resistantCladding
Quality cladding for a variety of purposes
Blast relief cladding
The base principle for blast relief cladding is windshield cladding, fixed by our special, in-house designed relief bolts.
Heatshield cladding panels are based on a single skin type (stainless steel 316L) and supplied complete with framing, if required. The panels are bolted to back-up framing. The heatshield panels will meet the following criteria (at a minimum):
- Up to a 75% reduction in radiation from the external face to the internal face
- Visibility through the panels
- Natural ventilation through the panels
Standard windshield cladding is single skin corrugated sheeting with standard profile height of 35 mm. This sheeting can easily be fixed to supporting rails with stainless steel, self-tapping bolts. Special gaskets can be used to separate dissimilar materials (where required) to avoid galvanic corrosion. The maximum unsupported span of cladding is approximately 1800 mm.
Windshield cladding is also available with perforated designs for certain ventilation situations. If openings in the cladding are required,
Downloads for: Fire and Blast resistant cladding
InterDam B.V. Head Office
2984 BB Ridderkerk
T: +31 (0) 180 470030
We care about your privacy.