Fire and blast resistant
CladdingQuality cladding for a variety of purposes
Blast relief cladding
The base principle for blast relief cladding is windshield cladding, fixed by our special, in-house designed relief bolts.
Heatshield cladding
Heatshield cladding panels are based on a single skin type (stainless steel 316L) and supplied complete with framing, if required. The panels are bolted to back-up framing. The heatshield panels will meet the following criteria (at a minimum):
- Up to a 75% reduction in radiation from the external face to the internal face
- Visibility through the panels
- Natural ventilation through the panels
Windshield cladding
Standard windshield cladding is single skin corrugated sheeting with standard profile height of 35 mm. This sheeting can easily be fixed to supporting rails with stainless steel, self-tapping bolts. Special gaskets can be used to separate dissimilar materials (where required) to avoid galvanic corrosion. The maximum unsupported span of cladding is approximately 1800 mm.
Windshield cladding is also available with perforated designs for certain ventilation situations. If openings in the cladding are required,

Want to know more about our Fire and Blast resistant cladding?

Europe
InterDam B.V.
Benedenrijweg 186
2987 VB Ridderkerk
The Netherlands
T: +31 (0) 180 470030
North America
InterDam Americas Inc.
19998 Hickory Twig Way
Spring, TX 77388
United States
T: +1 281-882-8302